Description
EMX Infrared Photoeye Kit | EMX-BPE-50
EMX Infrared Photoeye Kit | EMX-BPE-50
The BPE-50 Battery-Powered Photo Beam system uses 12 -24 VDC/AC on the transmitter and receiver. The transmitter has the option of using the two 3.6 Volt batteries for power.
Features
- The BPE-50 only requires one side wiring when used with the included optional batteries
- Power save option
- 90-degree adjustment left or right
Manufacturer’s Warranty
- 2 Years
Technical Specifications
- Detection range: 50 feet
- Detection Angle: +/- 5%
- Expected Battery Life: 2 years
- Size: 4.4” (112mm) x 2.05” (52mm) x 1.3” (33mm)
- Power Supply: 12-24 VDC 24 VAC (2-3.6 Volt Lithium Batteries for transmitter optional /included)
- Current Draw: Current Draw
- Relay Type: 2 Form C DPST contact rating .5A @ 24VDC / 120VAC
- Temperature: -20C – 55C
- Wavelength: 880 nm
- Frequency: 787 Hz
- Environmental: IP 65
- Detect Indicator: Red LED
- Connector: Terminal block
- Relay contact: 0.5Amp
- Housing Material: PA6 30% FG
- Size: H 4.4in (112mm) x W 2.05in (52mm) x D 1.3in (33mm)
- Sensitivity: Jumper J1 on receiver
- Detection delay: < 30 ms
- Reset delay: < 120 ms
Product Literature
- EMX-BPE-50 Spec Sheet
- EMX-BPE-50 Instruction Manual
