Description
EMX Vehicle Loop Detector with Detachable 7-PIN Terminal Block | EMX-ULT-II
EMX Vehicle Loop Detector with Detachable 7-PIN Terminal Block | EMX-ULT-II
The ULT-II is a compact, cost effective and reliable vehicle loop detector that is
easy to set-up and install with a removable 7-pin screw terminal.
Sensitivity selection is simplified by the ULTRAMETERTM display that indicates the
appropriate sensitivity setting to detect the vehicle positioned on the loop.
The 10 sensitivity settings allow for finer adjustment of the detection level, while the
4 frequency settings provide greater flexibility in preventing crosstalk in multi-loop
applications.
Features
- Easy to install and set up with the ULTRAMETER sensitivity display
- Fail safe in the event of a loop failure
- Fail secure in the event of a power loss
- Frequency count/reset switch
- 10 sensitivity settings
- Loop diagnostics
- 4 operating frequencies
- Lightning and surge protection
- Frequency counter
- Fail safe operation
- CE compliant
Manufacturer’s Warranty
- 2 Years
Vehicle Loop Detector Sensitivity Display
.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
*NOTE: The ULTRA-II motherboard referenced in the video is no longer available.
Technical Specifications
- Power Supply: 12-24 VDC/AC
- Current Draw: 18 mA max.
- Dimensions: L=3.0in (76 mm) W=0.9in (22 mm) H=2.75in (70 mm)
- Weight: 0.15 lbs. (69g)
- Loop Inductance: 20…2000µH (Q factor >5)
- Environmental Tracking: Automatic Compensation
- Operating Environment: -40° C to 82° C (-40°F to 180° F) 0 to 95% relative humidity
- Housing Material: ABS
- Connection: 7 position screw terminal
- Loop Compensation: Isolation transformer allows operation with poor quality loops
- Loop Frequency: 4 settings (low, med-low, med-hi, high)
- Surge Protection: Loop circuitry protected by surge suppressors
- ULTRAMETER Display: Indicates optimum sensitivity level
- Output: Relay 1A @24 VDC Common, Normally Open, Normally Closed
- Power/Loop Fault Indicator: Green LED
- Detect/Frequency Count Indicator: Red LED
- Frequency Count: To aid in detector set up and prevention of crosstalk
- Pulse/Presence: Allows the relay output to send either a pulse output or have a constant presence
- Sensitivity: 10 levels, 0-9
- ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high bed vehicles
Product Literature
- EMX ULTRA-II Spec Sheet
- EMX ULTR-II Manual
