Description
AES e-Loop Commercial Loop Kit (EXIT MODE) | AES-EL00C-K
AES e-Loop Commercial Loop Kit (EXIT MODE) | AES-EL00C-K
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle.
Note: Gate or door controller must have a dedicated open input and auto close function enabled.
Includes
- 1 x e-Loop commercial Exit mode wireless detection module
- 1 x single-channel transceiver (Trans-50)
- 2 x Dyna bolts
Features
- Lower power consumption/3-axis magnetometer for vehicle detection
- 8 Hz sampling rate
- Auto-calibration
- Exit/Entry detection mode
- Fast and simple installation – Quick non-permanent installation
- Up to 10-year battery life (Battery life is dependent on many factors, including daily activations, time used per activation, radar range, and external conditions.)
- Compact design
- Compatible with various gates
- Reliable radio communications with transceiver
- Reliable radio communication
- High-security 128-Bit AES Encryption
Manufacturer’s Warranty Period
- 2 Years
Technical Specifications
Radio
- Frequency: 433.39 MHz
- Modulation: FSK
- Bitrate: 9.6 kbps
- Bandwidth: 250 kHz
- Antenna Type: PCB
- Nominal Output Power: 10 dBm
- Receive Sensitivity: -126.2 dBm
- Security: 128-Bit AES Encryption
- Spurious Emissions
- 30 – 1000 MHz: < -56 dBm
- 1 – 12.75 GHz: < -44 dBm
- 1.8 – 1.9 GHz: < -56 dBm
- 5.15 – 5.3 GHz: < -51 dBm
Power, Physical, and Environment
- Power: 4 * 3.6 V 2700ma
- Dimensions: 8.6*8.6*1 inches
- Weight: 2.2 pounds
- Environment
- designed for above-ground mounting
- IP68 ingress protection
- Operating Temp: -4°F to 176°F
- Standby Power: 14μA
- Activation Power: 50mA
- Magnetometer Detection Areas
- 1.6 yards = Low Detection Area
- 1 yard = Medium Detection Area
- 0.6 yard= High Detection Area
Product Literature
- AES EL00C Spec Sheet
- AES EL00C Exit Mode Fitting Instructions
- AES ETRANS50 Cutsheet
- AES ETRANS50 Instructions
- AES Warranty Disclaimer
