Description
BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100
BEA R2E-100 Request to Exit Security Sensor | BEA-10R2E-100
Focused Active Infrared Request to Exit Sensor
BEA’s UL Listed R2E-100 is a request-to-exit sensor with an active infrared (AIR) detection zone focused directly on the door handle. This allows the R2E-100 to only detect people intending to exit through the door as they reach for the door handle.
The AIR based R2E-100 improves accuracy of detection as compared to passive infrared (PIR) technology including ground based errors, PIR sensor spoofing, known PIR vulnerabilities (hot air, background objects, cross traffic).
Features
- Standards compliant: UL 294 / ULC S319 Listed
- Define your tilt angle: Adjustable tilt angle from 0 – 10°
- Customizable detection zones: Adjustable detection range from 20 – 48 inches (The R2E-100 can accommodate swinging doors up to 7 feet)
- Low profile mounting – Low profile sensor mounts on or above the door frame.
Specifications
- Detector Type: Active, focused Infrared
- Supply Voltage: 12 – 24 VAC/VDC ±10%, 60 Hz
- Current Consumption: 155 mA (sounder off) / 200 mA (sounder max volume)
- Temperature: -20 – 120°F (-29 – 49°C). For UL Listed installations, the temperature range is 32 – 120°F (0 – 49°C).
- Humidity: 0 – 93% non-condensing for ULC-S319 installations; 0 – 85% non-condensing for UL-294 Listed installations
- Detection Distance (Range): Potentiometer adjusted from 20 – 48”
- Relay: Two Form “C” contact sets rated for 1.3A @ 24 VAC / 1.3A @ 30 VDC0.6pf (Power Factor)
- Relay Hold Time: Potentiometer adjusted from 0.5 – 60 seconds
- Sounder: 85 dB max with adjustable volume
- Indicator LEDs: Green, red, yellow, orange
- REX Input: DRY Contact, normally-opened (NO)
- Card Reader Input: DRY Contact, normally-closed (NC) – Can be disabled/enabled via DIP
- Door Position Switch Input: DRY Contact, normally-opened (NO) – Can be disabled/enabled via DIP
- Dimensions: 6 7/10” (W) × 2” (H) × 1 7/10” (D) (174.63 mm × 51 mm × 47.63mm)
- Material: Plastic (ABS and PC)
- Housing: Color Black
- Wiring Interface: JST (14-pin), 4’ cable
- Certifications: UL/ULC 294/S319, FCC Part B
Product Literature
- BEA R2E-100 User Guide
- BEA R2E-100 Cut Sheet